set_fluid

MotorCAD.set_fluid(cooling_type, fluid)

Set the fluid for a cooling type.

Parameters:

cooling_typestr

Type of the cooling. Options are "InternalFluid", "ExternalFluid", "ShaftSGFluid", "RotorWJFluid", "SlotWJFluid", "HousingWJFluid", "WetRotorFluid", "SprayCoolingFluid", "TVentFluid", "Spray_RadialHousing_Fluid", "Spray_RadialRotor_Fluid", "Spray_RadialHousing_Fluid_F", "Spray_RadialHousing_Fluid_R", "Spray_RadialRotor_Fluid_F" and "Spray_RadialRotor_Fluid_R".

fluid