E-magnetic

This example demonstrates internal scripting E-Mag functionality

import ansys.motorcad.core as pymotorcad

mc = pymotorcad.MotorCAD()

Disable pop-up messages

mc.set_variable("MessageDisplayState", 2)


# This function is called when "Run" is pressed
def main():
    pass


class emagnetic:
    def initial(self):
        mc.display_screen("Scripting")
        shaft_speed = mc.get_variable("ShaftSpeed")
        if shaft_speed > 1000:
            print("Shaft speed is too high. Resetting to 500")
            mc.set_variable("ShaftSpeed", 500)

    def final(self):
        loss_total = mc.get_variable("loss_total")
        # display total loss rounded to 2dp if available
        print("total loss is: " + str(round(loss_total, 2)))
        mc.display_screen("Calculation")

PyMotorCAD Documentation Example

(Used for the PyMotorCAD Documentation Examples only)

try:
    from setup_scripts.setup_script import run_emag_demo
except ImportError:
    pass
else:
    run_emag_demo(mc)

mc.set_variable("MessageDisplayState", 0)

5:18:02 PM : Warning: Licences for different machine types are checked out.
You may wish to review your licence configuration.
5:18:08 PM : Loaded script file: C:\actions-runner-docs\_work\pymotorcad\pymotorcad\examples\internal_scripting\emag.py
5:18:08 PM : Python script output: Shaft speed is too high. Resetting to 500
5:18:13 PM : FEA Calculation Time: 3 Seconds
5:18:13 PM : Warning: Operating point outside voltage limit. Check the DC bus voltage.
5:18:13 PM : Solving completed
5:18:14 PM : Python script output: total loss is: 137.91
Shaft speed:500