.. DO NOT EDIT.
.. THIS FILE WAS AUTOMATICALLY GENERATED BY SPHINX-GALLERY.
.. TO MAKE CHANGES, EDIT THE SOURCE PYTHON FILE:
.. "examples\internal_scripting\thermal_transient.py"
.. LINE NUMBERS ARE GIVEN BELOW.

.. only:: html

    .. note::
        :class: sphx-glr-download-link-note

        :ref:`Go to the end <sphx_glr_download_examples_internal_scripting_thermal_transient.py>`
        to download the full example code.

.. rst-class:: sphx-glr-example-title

.. _sphx_glr_examples_internal_scripting_thermal_transient.py:


.. _ref_internal_scripting_thermal_transient:

Thermal transient
=================
This example demonstrates internal scripting thermal transient functionality

.. GENERATED FROM PYTHON SOURCE LINES 32-33

Perform required imports

.. GENERATED FROM PYTHON SOURCE LINES 33-35

.. code-block:: Python

    import ansys.motorcad.core as pymotorcad








.. GENERATED FROM PYTHON SOURCE LINES 36-37

Launch Motor-CAD

.. GENERATED FROM PYTHON SOURCE LINES 37-70

.. code-block:: Python

    mc = pymotorcad.MotorCAD()


    # This function is called when "Run" is pressed
    def main():
        pass


    class thermal_transient:
        def initial(self):
            # %%
            # Disable pop-up messages
            mc.set_variable("MessageDisplayState", 2)
            mc.display_screen("Scripting")
            # initialise water jacket and rotor cooling flow rate
            mc.set_variable("Wet_Rotor_Fluid_Volume_Flow_Rate", 0.1)
            mc.set_variable("WJ_Fluid_Volume_Flow_Rate", 0.1)

        def main(self):
            current_time = mc.get_variable("CurrentTime")
            if 1000 <= current_time < 1500:
                # if between 1000 and 1500 s, stop water jacket coolant flow
                mc.set_variable("WJ_Fluid_Volume_Flow_Rate", 0)
            else:
                # if between 1000 and 1500 s, rotor coolant flow
                mc.set_variable("Wet_Rotor_Fluid_Volume_Flow_Rate", 0)

        def final(self):
            # Called after calculation
            print("Thermal Transient - Final")
            mc.set_variable("MessageDisplayState", 0)









.. GENERATED FROM PYTHON SOURCE LINES 71-76

Note
----
For more information about transient thermal analysis, see the Scripting Control In
Duty Cycle tutorial, installed under
C:\ANSYS_Motor-CAD\VersionNumber\Tutorials\Scripting_Control_In_Duty_Cycle.

.. GENERATED FROM PYTHON SOURCE LINES 78-81

PyMotorCAD Documentation Example
--------------------------------------
(Used for the PyMotorCAD Documentation Examples only)

.. GENERATED FROM PYTHON SOURCE LINES 81-89

.. code-block:: Python

    try:
        from setup_scripts.setup_script import run_thermal_transient_demo
    except ImportError:
        pass
    else:
        run_thermal_transient_demo(mc)

    mc.set_variable("MessageDisplayState", 0)



.. image-sg:: /examples/internal_scripting/images/sphx_glr_thermal_transient_001.png
   :alt: thermal transient
   :srcset: /examples/internal_scripting/images/sphx_glr_thermal_transient_001.png
   :class: sphx-glr-single-img






.. rst-class:: sphx-glr-timing

   **Total running time of the script:** (3 minutes 41.660 seconds)


.. _sphx_glr_download_examples_internal_scripting_thermal_transient.py:

.. only:: html

  .. container:: sphx-glr-footer sphx-glr-footer-example

    .. container:: sphx-glr-download sphx-glr-download-jupyter

      :download:`Download Jupyter notebook: thermal_transient.ipynb <thermal_transient.ipynb>`

    .. container:: sphx-glr-download sphx-glr-download-python

      :download:`Download Python source code: thermal_transient.py <thermal_transient.py>`

    .. container:: sphx-glr-download sphx-glr-download-zip

      :download:`Download zipped: thermal_transient.zip <thermal_transient.zip>`


.. only:: html

 .. rst-class:: sphx-glr-signature

    `Gallery generated by Sphinx-Gallery <https://sphinx-gallery.github.io>`_