.. DO NOT EDIT.
.. THIS FILE WAS AUTOMATICALLY GENERATED BY SPHINX-GALLERY.
.. TO MAKE CHANGES, EDIT THE SOURCE PYTHON FILE:
.. "examples\internal_scripting\thermal_steady_state.py"
.. LINE NUMBERS ARE GIVEN BELOW.

.. only:: html

    .. note::
        :class: sphx-glr-download-link-note

        :ref:`Go to the end <sphx_glr_download_examples_internal_scripting_thermal_steady_state.py>`
        to download the full example code.

.. rst-class:: sphx-glr-example-title

.. _sphx_glr_examples_internal_scripting_thermal_steady_state.py:


.. _ref_internal_scripting_thermal_steady_state:

Thermal steady-state
====================
This example demonstrates internal scripting thermal steady-state functionality

.. GENERATED FROM PYTHON SOURCE LINES 31-32

Perform required imports

.. GENERATED FROM PYTHON SOURCE LINES 32-34

.. code-block:: Python

    import ansys.motorcad.core as pymotorcad








.. GENERATED FROM PYTHON SOURCE LINES 35-36

Launch Motor-CAD

.. GENERATED FROM PYTHON SOURCE LINES 36-39

.. code-block:: Python

    mc = pymotorcad.MotorCAD()









.. GENERATED FROM PYTHON SOURCE LINES 40-43

We will update the resistance between nodes with the following equation:
resistance = (0.01 × ambient_temp) + 1
This function is called when "Run" is pressed

.. GENERATED FROM PYTHON SOURCE LINES 43-77

.. code-block:: Python

    def main():
        pass


    class thermal_steady:
        # Select nodes to update
        housing_node = 1
        ambient_node = 0

        def initial(self):
            # %%
            # Disable pop-up messages
            mc.set_variable("MessageDisplayState", 2)

            # Adjust Losses
            mc.display_screen("Scripting")
            mc.set_variable("Armature_Copper_Loss_@Ref_Speed", 200)

        def main(self):
            ambient_temp = mc.get_variable("T_Ambient")
            resistance = (ambient_temp * 0.01) + 1
            mc.set_resistance_value(
                "Custom Resistance", self.ambient_node, self.housing_node, resistance, ""
            )
            print(str(resistance))

        def final(self):
            # Get temperature from node
            housing_temp = mc.get_node_temperature(self.housing_node)
            print("Housing Temperature: " + str(round(housing_temp, 1)))

            mc.set_variable("MessageDisplayState", 0)









.. GENERATED FROM PYTHON SOURCE LINES 78-81

PyMotorCAD Documentation Example
--------------------------------------
(Used for the PyMotorCAD Documentation Examples only)

.. GENERATED FROM PYTHON SOURCE LINES 81-87

.. code-block:: Python

    try:
        from setup_scripts.setup_script import run_thermal_steady_demo
    except ImportError:
        pass
    else:
        run_thermal_steady_demo(mc)




.. rst-class:: sphx-glr-script-out

 .. code-block:: none

    Armature copper loss = 200
    2:56:41 PM : Python script output: 1.4
    2:56:41 PM : Steady State calculation completed after 7 iterations
    2:56:42 PM : Python script output: Housing Temperature: 111.8





.. rst-class:: sphx-glr-timing

   **Total running time of the script:** (0 minutes 49.157 seconds)


.. _sphx_glr_download_examples_internal_scripting_thermal_steady_state.py:

.. only:: html

  .. container:: sphx-glr-footer sphx-glr-footer-example

    .. container:: sphx-glr-download sphx-glr-download-jupyter

      :download:`Download Jupyter notebook: thermal_steady_state.ipynb <thermal_steady_state.ipynb>`

    .. container:: sphx-glr-download sphx-glr-download-python

      :download:`Download Python source code: thermal_steady_state.py <thermal_steady_state.py>`

    .. container:: sphx-glr-download sphx-glr-download-zip

      :download:`Download zipped: thermal_steady_state.zip <thermal_steady_state.zip>`


.. only:: html

 .. rst-class:: sphx-glr-signature

    `Gallery generated by Sphinx-Gallery <https://sphinx-gallery.github.io>`_